AS9120B, ISO 9001:2015, and FAA AC 0056B Accredited
Buy 3m Parts - Explore Electromechanical Parts List 23
Explore products from 3m in Electromechanical. 80610049571, 80610049563, 80610049555, 80610049969, 80610049951, 80610050116, 80610050355
Category Directory
Adhesives And CoatingCircuit ProtectionElectronic ConnectorsEnclosures, Racks, And CabinetsFans, Thermal ManagementIndustrial Automation And ControlsOffice SuppliesPersonal Protective EquipmentPipe, Tubing, Hose, And FittingsSafety And Sign AccessoriesSemiconductorsShrink TubingSwitchesTest And MeasurementThermal ManagementToolsTools Hardware And SuppliesUncategorized ProductsWire And Cable
Displaying Page 23 of 83
| Part No. | Description | Availability | RFQ |
|---|---|---|---|
| 80610049571 | The Standard Fork Alows Rapid Connection Of Wire. They Are Usually Used On Free-Standing Studs, Because Of Their Wider Tongues. | Avl | RFQ |
| 80610049563 | The Standard Fork Alows Rapid Connection Of Wire. They Are Usually Used On Free-Standing Studs, Because Of Their Wider Tongues. | Avl | RFQ |
| 80610049555 | Fork Terminals Allow Rapid Connection Of Wire, And Are Usually Used On Free-Standing Studs Due To Their Wider Tongues. | Avl | RFQ |
| 80610049969 | Block Forks Have The Same Strength As The Standard Fork, But Are Designed To Use In A Terminal Block Because Their Sides Lie Flat Against The Barrier Portion Of The Terminal Block. | Avl | RFQ |
| 80610049951 | Block Forks Have The Same Strength As The Standard Fork, But Are Designed To Use In A Terminal Block Because Their Sides Lie Flat Against The Barrier Portion Of The Terminal Block. | Avl | RFQ |
| 80610050116 | Block Forks Have The Same Strength As The Standard Fork, But Are Designed To Use In A Terminal Block Because Their Sides Lie Flat Against The Barrier Portion Of The Terminal Block. | Avl | RFQ |
| 80610050355 | A Ring Is The Standard Style Of Tongue. The Safest And Most Reliable; It Cannot Be Removed Unless Mounting Screw Is Removed. | Avl | RFQ |
| 80610050348 | A Ring Is The Standard Style Of Tongue. The Safest And Most Reliable; It Cannot Be Removed Unless Mounting Screw Is Removed. | Avl | RFQ |
| 80610050298 | Flanged Forks Give The Benefits Of Both The Block And Locking Forks By Staying Secure In The Event That The Screw Should Loosen. | Avl | RFQ |
| 80610050280 | Flanged Forks Give The Benefits Of Both The Block And Locking Forks By Staying Secure In The Event That The Screw Should Loosen. | Avl | RFQ |
| 80610050702 | This Connector Has A Wire Range Of 12-10 Awg And A Case Quantity Of 500. This Butt Connector Uses Chamfered Barrel Ends To Provide Fast Easy Wire Insertion From Both Ends And A Built In Wire Stop For Correct Positioning. It Must Be Crimped At Ends. This Butt Connector Uses Chamfered Barrel Ends To Provide Fast Easy Wire Insertion From Both Ends And A Built In Wire Stop For Correct Positioning. It | Avl | RFQ |
| 80610051197 | The Spring-Like Tongue Locks Into Place Around The Stud Even When The Mount Screw Is Not Tightened. Extra Force Is Required To Remove It From The Stud. | Avl | RFQ |
| 80610051551 | A Ring Is The Standard Style Of Tongue. The Safest And Most Reliable; It Cannot Be Removed Unless Mounting Screw Is Removed. | Avl | RFQ |
| 80610052765 | Run And Tap Splicing. Maximum Insulation O.D.Diameter Of 0.145 Inches (3,68 Mm) And A Operating Temperature Of 194(Deg)f (90(Deg)c). The Suggested Application Tool For This Connector Is The E-9bm Crimping Tool. | Avl | RFQ |
| 80610052716 | This Butt Connector Uses Chamfered Barrel Ends To Provide Fast Easy Wire Insertion From Both Ends And A Built In Wire Stop For Correct Positioning. It Must Be Crimped At Ends. | Avl | RFQ |
| 80610052054 | This Connector Has A Wire Range Of 4 Awg And A Case Quantity Of 200. This Butt Connector Uses Chamfered Barrel Ends To Provide Fast Easy Wire Insertion From Both Ends And A Built In Wire Stop For Correct Positioning. It Must Be Crimped At Ends. | Avl | RFQ |
| 80610056295 | Block Forks Have The Same Strength As The Standard Fork, But Are Designed To Use In A Terminal Block Because Their Sides Lie Flat Against The Barrier Portion Of The Terminal Block. | Avl | RFQ |
| 80610056287 | Block Forks Have The Same Strength As The Standard Fork, But Are Designed To Use In A Terminal Block Because Their Sides Lie Flat Against The Barrier Portion Of The Terminal Block. | Avl | RFQ |
| 80610057772 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610065254 | These Kits Are Inline Splices Designed For Use On 25 Kv Cn Or Jcn Cable. | Avl | RFQ |
| 80610057764 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610057707 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610064653 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610060685 | The 3m™ Cable Splices 5430 Are Inline Splices Designed For Use On 35 Kv Cn Or Jcn Cable. Meets Requirements Of Ieee Standard 404. The Continuous Current Rating Of The Cable It Is Sized To Accommodate. Each Kit Makes One Splice. | Avl | RFQ |
| 80610060677 | The 3m™ Cable Splices 5430 Are Inline Splices Designed For Use On 35 Kv Cn Or Jcn Cable. Meets Requirements Of Ieee Standard 404. The Continuous Current Rating Of The Cable It Is Sized To Accommodate. Each Kit Makes One Splice. | Avl | RFQ |
| 80610064778 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610064760 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610064737 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610066617 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610065023 | The Disconnects Are Attached To Mating Part By Tongue Of Female Part Slipping Over Male Tab. The Use Of Dents And Rolled Edges On Female Part Provides Excellent Holding Force While Allowing Easy And Quick Disconnect. | Avl | RFQ |
| 80610592141 | It Can Be Used On 25/28 Kv Copper Or Aluminum, Cn Or Jcn Cables. It Is Designed To Replace Up To 6" (152 Mm) Of Damaged Cable, Eliminating The Need To Splice In A New Section Of Cable With Two Separate Splices. | Avl | RFQ |
| 80610072227 | This Is For Use With The 3m™ Scotchcast Reenterable Inline And Tap Splice Kits 78-R Series After Re-Entry. | Avl | RFQ |
| 80610072128 | These Are Shielded Or Nonshielded Plastic - And Rubber-Jacketed, Signal And Control (Or Power) Cables Rated Up To 1 Kv. | Avl | RFQ |
| 80610076418 | Injection Fitting | Avl | RFQ |
| 80610074942 | For Use With The 3014 Earth Contact Frame For Sheath (Earth Return) Fault Location; Length Of 4 Feet. | Avl | RFQ |
| 80610076772 | Each Kit Contains One Splice. | Avl | RFQ |
| 80610076764 | Each Kit Contains One Splice. | Avl | RFQ |
| 80610077127 | These Multi-Mold Kits Are Used To Electrically Insulate Odd-Sized And Odd-Shaped Splices On Cables Rated Through 1kv. | Avl | RFQ |
| 80610077119 | These Multi-Mold Kits Are Used To Electrically Insulate Odd-Sized And Odd-Shaped Splices On Cables Rated Through 1kv. | Avl | RFQ |
| 80610077101 | These Multi-Mold Kits Are Used To Electrically Insulate Odd-Sized And Odd-Shaped Splices On Cables Rated Through 1kv. | Avl | RFQ |
| 80610076954 | It Is Flame Retardant And Has Msha Approval Number P-142-5 When Used With 82-F1 Or 82-F2 Splice Kits. | Avl | RFQ |
| 80610084347 | Maximum Insulation O.D.Diameter Of 0.150 Inches (3,81 Mm) And A Operating Temperature Of 221(Deg)f (105(Deg)c). The Suggested Application Tool For This Connector Is The E-9bm Crimping Tool With A Mate Of 0.250 Inch Male Tab Mng10-250 Dmi. | Avl | RFQ |
| 80610079925 | Each Kit Contains One Splice. | Avl | RFQ |
| 80610079511 | Cable Repair Space Web 1 1/2" X 40". A Metal Gun Which Uses Resin Filled "unipaks" To Pressure Fill Electrical Splices And Terminations. | Avl | RFQ |
| 80610087118 | This Scotch® Vinyl Mastic Pad 2200 Resistant To Abrasion, Moisture, Alkalis, Acid, Copper Corrosion, Uv And Varying Weather Conditions. This Conformable Pad Is For Insulating, Moisture-Sealing And Pad Connections Up To 600v. Compatible With Solid Dielectric Cable Insulation, It Is Temperature-Rated To 176(Deg)f (80(Deg)c). | Avl | RFQ |
| 80610087100 | This Scotch® Vinyl Mastic Pads 2200 Resistant To Abrasion, Moisture, Alkalis, Acid, Copper Corrosion, Uv And Varying Weather Conditions. This Conformable Pad Is For Insulating, Moisture-Sealing And Pad Connections Up To 600v. Compatible With Solid Dielectric Cable Insulation, It Is Temperature-Rated To 176(Deg)f (80(Deg)c). | Avl | RFQ |
| 80610089734 | Use To Electrically Tap Into A Wire In Mid-Span Without Cutting Or Stripping The Wire. Connector Then Mates With A .250 Inch (6.35 Millimeter) Male Tab, Making A Reusable Quick-Connect Wiring Termination. T-Tap Disconnect. Maximum Insulation O.D.Diameter Of 0.150 Inches (3,81 Mm) And A Operating Temperature Of 221(Deg)f (105(Deg)c). The Suggested Application Tool For This Connector Is The E-9bm Crimping Tool With A Mate Of 0.250 Inch Male Tab Mng10-250 Dmi. | Avl | RFQ |
| 80610089726 | Use To Electrically Tap Into A Wire In Mid-Span Without Cutting Or Stripping The Wire. Connector Then Mates With A .250 Inch (6.35 Millimeter) Male Tab, Making A Reusable Quick-Connect Wiring Termination. T-Tap Disconnect. Maximum Insulation O.D.Diameter Of 0.150 Inches (3,81 Mm) And A Operating Temperature Of 221(Deg)f (105(Deg)c). The Suggested Application Tool For This Connector Is The E-9bm Crimping Tool With A Mate Of 0.250 Inch Male Tab Mng10-250 Dmi. | Avl | RFQ |
| 80610096952 | This Metal Case With Plastic Insert Tray Is Divided Into 14 Terminal Compartments, One Tool Compartment And Two Miscellaneous Compartments. Order Contents Separately. | Avl | RFQ |
| 80610096598 | This Tool Crimps Barrel And Insulation Grip Simultaneously On Insulated Terminals And Connectors. It Will Crimp Nylon Or Vinyl Insulated, Butted Or Brazed Seam Terminals And Connectors. | Avl | RFQ |
| 80610116487 | The 3m™ Scotchlok Copper Two Hole Long Barrel Lug 31168 Is Used On Copper Conductors Only. It Is Constructed Of One-Piece, Seamless, High-Conductivity Copper. | Avl | RFQ |
| 80610116479 | The 3m™ Scotchlok Copper One Hole Long Barrel Lug 31068 Is Used On Copper Conductors Only. It Is Constructed Of One-Piece, Seamless, High-Conductivity Copper. | Avl | RFQ |
| 80610116461 | The 3m™ Scotchlok Copper Two Hole Long Barrel Lug 31160 Is Used On Copper Conductors Only. It Is Constructed Of One-Piece, Seamless, High-Conductivity Copper. | Avl | RFQ |
| 80610592158 | The Splice Is An Elongated Version Of The Qs-Ii. It Is Designed To Replace Up To 6 Inch (152 Mm) Of Damaged Cable, Thus Eliminating The Need To Splice In A Mew Section Of Cable With Two Separate Splices. | Avl | RFQ |
| 80610123301 | These Kits Are Designed To Be Used With Copper Compression, One- Or Two-Hole Lugs. After Being Crimped Onto The Cables, The Lugs Are Bolted Together In An Inline Configuration, Then Insulated And Sealed With The 3m™ Motor Lead Splicing Kit. Each Kit Contains All The Necessary Materials (Except Lugs) Needed To Make Three Splices. The Lugs Must Be Purchased Separately. 3m™ Scotchlok 30000 Series Copper Compression Lugs, Or Other Ul Listed Copper Lugs, Can Be Used. | Avl | RFQ |
| 80610123475 | This Kit Includes: 1 Molded Sheath Seal Body And 1 Set Of Instructions. | Avl | RFQ |
| 80611472590 | 3m™ Heat Shrink Tubing Fp-301 Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. | Avl | RFQ |
| 80610987671 | This Kit Contains An Elbow Body, Loadbreak Probe, Probe Installation Tool, Silicone Lubricant, Cold Shrink Jacketing Tube, Mastic Strips, Ground Braid Assembly, Constant Force Spring, Cc-3 Cable Cleaning Pads, And Installation Instructions | Avl | RFQ |
| 80610123483 | This Kit Includes: 1 Molded Sheath Seal Body And 1 Set Of Instructions. | Avl | RFQ |
| 80610123533 | 3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Tape, Wire, An Unishield® Shield Cable.Conductor Size Range For· 5 Kv (100%): 600-1500 Kcmil · 5 Kv (133%): 600-1500 Kcmil · 8 Kv (100%): 600-1500 Kcmil · 8 Kv (133%): 500-1250 Kcmil · 15 Kv (100%): 500-1250 Kcmil · 15 Kv (133%): 350-1000 Kcmil | Avl | RFQ |
| 80610126841 | For Applying Ground Capability. Stainless Steel. | Avl | RFQ |
| 80610126833 | Extends Ground Capability To 12 Ft. | Avl | RFQ |
| 80610126072 | This Ground Strap Assembly Kit Is Designed For Grounding Tape And Wire-Shielded Power Cables. It Has 3 Per Bag And 9 Bags Per Case. | Avl | RFQ |
| 80610126064 | This Ground Strap Assembly Kit Is Designed For Grounding Tape And Wire-Shielded Power Cables. It Has 3 Per Bag And 9 Bags Per Case. | Avl | RFQ |
| 80610126056 | This Ground Strap Assembly Kit Is Designed For Grounding Tape And Wire-Shielded Power Cables. It Has 3 Per Bag And 9 Bags Per Case. | Avl | RFQ |
| 80610125355 | A Ring Is The Standard Style Of Tongue. The Safest And Most Reliable; It Cannot Be Removed Unless Mounting Screw Is Removed. | Avl | RFQ |
| 80610134175 | The Spring-Like Tongue Locks Into Place Around The Stud Even When The Mount Screw Is Not Tightened. Extra Force Is Required To Remove It From The Stud. | Avl | RFQ |
| 80610134159 | The Spring-Like Tongue Locks Into Place Around The Stud Even When The Mount Screw Is Not Tightened. Extra Force Is Required To Remove It From The Stud. | Avl | RFQ |
| 80610134506 | The Spring-Like Tongue Locks Into Place Around The Stud Even When The Mount Screw Is Not Tightened. Extra Force Is Required To Remove It From The Stud. | Avl | RFQ |
| 80610134480 | The Spring-Like Tongue Locks Into Place Around The Stud Even When The Mount Screw Is Not Tightened. Extra Force Is Required To Remove It From The Stud. | Avl | RFQ |
| 80610145254 | 2-10#18, 2-7#16, 1-6#14, 1-5#12, 1-3#10, 1-2#8, 1#6 Awg. Designed For Speed And Efficiency, These Connectors Spin-On Quickly And Tighten-Down Easily. They'Re Engineered For Easy Back-Off, Too. The Live Inner Spring Action Delivers Uniform Holding Power. | Avl | RFQ |
| 80610145965 | 3m™ Temflex General Use Vinyl Electrical Tape 1700p Is Used For Protective Jacketing And Harnessing. Flame Retardant And Cold Resistant. Ul Listed And Csa Certified For 176(Deg)f (80(Deg)c). | Avl | RFQ |
| 80610145247 | 5-7#22, 3-6#20, 2-6#18, 2-6#16, 1-4#14, 1-3#12 Awg. Designed For Speed And Efficiency, These Connectors Spin-On Quickly And Tighten-Down Easily. They'Re Engineered For Easy Back-Off, Too. The Live Inner Spring Action Delivers Uniform Holding Power. | Avl | RFQ |
| 80610139778 | Each Kit Contains One Splice. | Avl | RFQ |
| 80610138986 | Scotch® Premium Vinyl Electrical Tape Super 88 Offers Better Mechanical/Abrasion Resistance, And Is Thicker For Quicker Build-Up. For Professional Use, This Tape Combines The Flexibility Of A Pvc Backing With Excellent Electrical Insulating Properties To Provide Primary Electrical Insulation For Splices Up To 600v And Protective Jacketing. Ul Listed And Csa Certified. Excellent Resistance To Uv Rays, Abrasion, Moisture, Copper Corrosion, Alkalis And Acids. Excellent All-Weather Performance In Cold To 0(Deg)f (-18(Deg)c) Or Hot To 220(Deg)f (105(Deg)c) | Avl | RFQ |
| 80610154454 | 3m™ Cold Shrink Outdoor Termination Kit 5664, 15 Kv, 1.30-1.95 In (33,0-49,5 Mm) O.D. | Avl | RFQ |
| 80610154421 | Conductor Size Range For· 15 Kv: 2-2/0 Awg· 25/28 Kv: 2-1/0 Awg | Avl | RFQ |
| 80610154637 | 3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Concentric Neutral Cables.Conductor Size Range For· 5 Kv (100%): 3/0 Awg-500 Kcmil · 5 Kv (133%): 2/0 Awg-500 Kcmil · 8 Kv (100%): 2/0 Awg-500 Kcmil · 8 Kv (133%):1/0 Awg-350 Kcmil · 15 Kv: 2/0 Awg | Avl | RFQ |
| 80610154678 | 3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable's Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Concentric Neutral Cables. | Avl | RFQ |
| 80610830772 | The Shield Adapter Kit Design Provides A Fault Current Capacity Of 600 Amps On 15-35 Kv Class Cables. These Cold Shrink Kits Require No Heat, Special Tools Or Special Skills To Install. The Cold Shrink Kits Come Complete With All Necessary Components (Except The Cable Accessory) And Are Installed In A Few Simple Steps. We'Ve Even Attached A "bleeder Wire" To The Ground Strap Eliminating The Need For Additional Wire And Connectors. Each Kit Contains Enough Material To Ground One Cable Accessory. | Avl | RFQ |
| 80610831127 | The Qs2000t Kit Allows You To Splice Either Single-Conductor Pilc Cable To Single-Conductor Pilc Cable, Or Single-Conductor Pilc Cable To Single-Conductor Poly/Epr Cable. | Avl | RFQ |
| 80610155022 | 3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Jacketed Concentric Neutral Cableconductor Size Range For· 15 Kv: 700-1500 Kcmil | Avl | RFQ |
| 80610155055 | 3m™ Cold Shrink Qt-Ii Terminations Provide Easy Installation For A Broad Spectrum Of Indoor And Outdoor Applications. The Cold Shrink Qt-Ii Termination Is Based On Specially Formulated, Track-Resistant Silicone Rubber Insulators With Built-In Hi-K Stress Relief. The Insulators Are Pre-Stretched Around A Spiral -Wound, Plastic Core. When The Terminator Is Slipped Over A Properly Prepared Cable And The Core Is Removed, The Terminator Immediately Shrinks To The Cable`s Dimensions. The Result Is A Void-Free, Flexible Seal Without Special Tools Or Torches. For Jacketed Concentric Neutral Cableconductor Size Range For· 15 Kv: 750-1500 Kcmil · 25/28 Kv: 500-1250 Kcmil · 35 Kv: 350-1000 Kcmil | Avl | RFQ |
| 80610219315 | 3m™ Thin Wall Tubing Fp-301 Is A Heat Shrinkable Flexible Polyolefin Tubing That Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610831291 | These Brackets Are Attached To The Cable Just Below The Termination. Cable O.D. Range: 0.80-1.25 In (20-32 Mm). Made From Galvanized Steel. | Avl | RFQ |
| 80610219356 | 3m™ Tubing Fp-301vw Is Rated For Continuous Operation From -55(Deg)c (-67(Deg)f) To 135(Deg)c (275(Deg)f) And Withstands Elevated Temperatures To 300(Deg)c (572(Deg)f) For Brief Periods. Minimum Shrink Temperature For All Fp-301vw Tubing Is 100(Deg)c (212(Deg)f). | Avl | RFQ |
| 80610831317 | These Brackets Are Attached To The Cable Just Below The Termination. Cable O.D. Range: 1.45-1.95 In (37-50 Mm). Made From Galvanized Steel. | Avl | RFQ |
| 80610831309 | These Brackets Are Attached To The Cable Just Below The Termination. Cable O.D. Range: 1.10-1.50 In (28-36 Mm). Made From Galvanized Steel. | Avl | RFQ |
| 80610240071 | 3m™ Tubing Fp-301vw Is Rated For Continuous Operation From -55(Deg)c (-67(Deg)f) To 135(Deg)c (275(Deg)f) And Withstands Elevated Temperatures To 300(Deg)c (572(Deg)f) For Brief Periods. Minimum Shrink Temperature For All Fp-301vw Tubing Is 100(Deg)c (212(Deg)f). | Avl | RFQ |
| 80610219489 | 3m™ Thin Wall Tubing Fp-301 Is A Heat Shrinkable Flexible Polyolefin Tubing That Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610219539 | 3m™ Thin Wall Tubing Fp-301 Is A Heat Shrinkable Flexible Polyolefin Tubing That Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610219638 | 3m™ Thin Wall Tubing Fp-301 Is A Heat Shrinkable Flexible Polyolefin Tubing That Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610219687 | 3m™ Thin Wall Tubing Fp-301 Is A Heat Shrinkable Flexible Polyolefin Tubing That Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610219737 | 3m™ Thin Wall Tubing Fp-301 Is A Heat Shrinkable Flexible Polyolefin Tubing That Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610831325 | These Brackets Are Attached To The Cable Just Below The Termination. Cable O.D. Range: 1.80-2.40 In (46-61 Mm). Made From Galvanized Steel. | Avl | RFQ |
| 80610831333 | Kit Includes: 1 Copper Screen Sleeve, 3 Mastic Seal Strips, 4 Constant Force Springs, 1 Preformed Ground Braid, And 1 Set Of Instructions. | Avl | RFQ |
| 80610219901 | 3m™ Fp-301 Is Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610219943 | 3m™ Thin Wall Tubing Fp-301 Is A Heat Shrinkable Flexible Polyolefin Tubing That Offers An Outstanding Balance Of Electrical, Physical And Chemical Properties For A Wide Variety Of Industrial And Military Applications. Rated For 275(Deg)f(135(Deg)c) Continuous Operation. Fp-301 Tubing Is Typically Used As A Shrink-Fit Electrical Insulation Over Cable Splices And Terminations. It Is Also Used For Lightweight Wire Harness Covering, Wire Marking, Wire Bundling, Component Packaging And Fire Resistant Covering. Fp-301 Clear Tubing Provides Excellent Visibility For Component Packing. All Fp-301 Tubing Is Split Resistant, Mechanically Tough, Easily Marked And Resists Cold Flow. Fp-301 Is Available In Black, White, Red, Blue, Yellow And Clear In The Standard Lengths Of 6-Inch (15,2 Cm) Cut Pieces, 48-Inch (1,21 M) And Small (8.5-Inch Core Diameter) Spools Of 50 (15,24 M) And 100 (30,48 M) Feet. Four-Foot Lengths Of Green Tubing Are Available In Sizes 1/16 Inch To 1/2 Inch. The Assorted Color Kit Has A Total Of 133 Pieces And Contains Seven Colors: Black, Red, White, Yellow, Blue, Green And Clear. The Black Kit Contains 102 Pieces, All 6" (512,4 Mm) Lengths (See Chart Below.)additional Sizes, Colors And Put-Ups Are Available -Please Contact Your 3m™ Electrical Products Sales Representative. Application Specifications: Ul Recognized And Csa Certified At 600 Volts At 257(Deg)f(125(Deg)c); Ul File No. E-39100 And Csa No. 38227. Mil-I-23053/5, Class 1,2. Ams 3636 (Type I) And Ams 3637 (Type Ii). To Order: Reference Specific Product Size, Color And Description On The Following Pages. Example: Fp-301-1/4, White 6" (15,2 Cm) Pieces. | Avl | RFQ |
| 80610227243 | The Extra Flexibility And Low Shrink Temperature Of Vfp-876 Tubing Make It Ideal For Shrink-Fit Jacketing And Insulation Of Flexible Wire Bundles And Sensitive Components. Vfp-876 Tubing Has A 2:1 Shrink Ratio. When Freely Recovered, The Tubing Will Shrink To 50% Of Its As-Supplied Internal Diameter. The Recovered Wall Thickness Of The Tubing Is Proportional To The Degree Of Recovery. High Expansion-Ratio Vfp-876 Tubing Is Available Subject To Factory Quotation. | Avl | RFQ |
| 80610227227 | The Extra Flexibility And Low Shrink Temperature Of Vfp-876 Tubing Make It Ideal For Shrink-Fit Jacketing And Insulation Of Flexible Wire Bundles And Sensitive Components. Vfp-876 Tubing Has A 2:1 Shrink Ratio. When Freely Recovered, The Tubing Will Shrink To 50% Of Its As-Supplied Internal Diameter. The Recovered Wall Thickness Of The Tubing Is Proportional To The Degree Of Recovery. High Expansion-Ratio Vfp-876 Tubing Is Available Subject To Factory Quotation. | Avl | RFQ |
No part selected